ISE 370 MANUFACTURING :: essays papers

ISE 370 MANUFACTURING IntroductionNumerical Control (NC) is the basis for more manufacturing processes in todays industry. NC is the operation of railway car tools and other process automobiles by a series of coded instructions. CNC or computer numerical find systems include a built-in computer to support the machine and process. The important objective of this ascertain was to simulate how a CNC machine is used in industry to facilitate a process and fabricate a intentional part. In this course the importance, uses, and limitations of CNC machines when applied to the industrial world have ein truth(prenominal) been learned. This assignment offered the opportunity to experience and evaluate the effects of a CNC machine on a process and vice versa. This is most important in the fast paced, changing world of industry we now live in. The goals of this labor movement were to design a part, write a code for the Fadal CNC machine, learn how to come to the code and operate the ma chine, and effectively fabricate the object from a ingurgitate of wax. A University of Georgia G was to be the knowing (Figure 1). The most toilsome aspect of this project was determining how to make the CNC leave out an ellipse. Because of this problem, the team wasnt sure if they would be able to fetch the appropriate design. There was preaching of making changes, in order to simplify the program. The adversity was met head on, however, and the authorized design was ultimately kept. Experiment/MethodThe first step subsequently determining what was to be cut by the CNC was to design the part exploitation a CAD program. Due to the familiarity of the team with AutoCAD, this was the program of choice to draw the G. It became immediately apparent upon drawing the object, that this could be a actually ch on the wholeenging design due to the inclusion of ellipses. The CNC codes supplied as reference square included how to draw arcs, but there was no information on drawing an ellipse. The team attempted to use I and J coordinates to bring out an ellipse. This proved to be an incorrect approach. When the program was get toed into the machine the picture haggard on the machine did not at all resemble a G. The team went back to the drawing board with another subject at hand. It is also possible to draw arcs using RF coordinates, which unavoidable finding radii.ISE 370 MANUFACTURING essays papersISE 370 MANUFACTURING IntroductionNumerical Control (NC) is the basis for more manufacturing processes in todays industry. NC is the operation of machine tools and other bear on machines by a series of coded instructions. CNC or computer numerical insure systems include a built-in computer to support the machine and process. The principal(prenominal) objective of this project was to simulate how a CNC machine is used in industry to facilitate a process and fabricate a designed part. In this course the importance, uses, and limitations of CNC machi nes when applied to the industrial world have all been learned. This assignment offered the opportunity to experience and evaluate the effects of a CNC machine on a process and vice versa. This is most important in the fast paced, changing world of industry we now live in. The goals of this project were to design a part, write a code for the Fadal CNC machine, learn how to enter the code and operate the machine, and effectively fabricate the object from a stop consonant of wax. A University of Georgia G was to be the designed (Figure 1). The most toilsome aspect of this project was determining how to make the CNC draw an ellipse. Because of this problem, the team wasnt sure if they would be able to draw the appropriate design. There was sermon of making changes, in order to simplify the program. The adversity was met head on, however, and the received design was ultimately kept. Experiment/MethodThe first step after(prenominal) determining what was to be cut by the CNC was to design the part using a CAD program. Due to the familiarity of the team with AutoCAD, this was the program of choice to draw the G. It became immediately apparent upon drawing the object, that this could be a very challenging design due to the inclusion of ellipses. The CNC codes supplied as reference stuff and nonsense included how to draw arcs, but there was no information on drawing an ellipse. The team attempted to use I and J coordinates to name an ellipse. This proved to be an incorrect approach. When the program was entered into the machine the picture pinched on the machine did not at all resemble a G. The team went back to the drawing board with another estimation at hand. It is also possible to draw arcs using RF coordinates, which involve finding radii.